Frama Matrix F4 / F6
28
4.5. Using the label dispenser function (Semi Automatic Feeder MFD and Automatic
Feeder AF/AFS only)
You should use the integrated label dispenser
for mail items 10 mm thick and above, e.g.
small parcels.
Press the key “Label” for this purpose. Select
the desired number of franking labels using
the 1–10 keypad and confirm your entry by
pressing OK.
Your franking system will print the set post-
age rate on the franking labels and eject the
labels to the left. Use only original Frama Matrix F4 / F6 franking labels.
To remove the adhesive label, bend the label at the perforation and peel off the backing pa-
per.
The function of the label dispenser is not available in the “Stack” mode of the feeder AF/AFS.
4.6. Franking mail items
4.6.1. Franking mail items with manual feeder MF / MFD
The manual feeder MF / MFD supports FeedControl which makes sure that
your mail items are always printed correctly. As a result, invalid postage
marks are now a thing of the past.
To feed in mail items, lay the mail item flush against the rear boundary of
the feed table. Push the mail item to the left into the Matrix franking sys-
tem. The feed rollers pull in the mail item and it is franked.
Mail items fed in at an angle are not franked thanks to FeedControl. Feed
in these unfranked mail items again, but square, for franking.