Frama Matrix F4 / F6
31
5. Using main menu
5.1. Controls of automatic feeder AF/AFS
The “Feeder” key is faded in only when the automatic feeder AF is
connected. This key is not provided when the manual feeder MF /
MFD is used.
Always keep your fingers and other pars of the body as well
as loose ties, necklaces, bracelets, scarves, open sleeves and
similar things away from the feed entry area and the feed
rollers. There is a risk of injury from rotating parts.
5.1.1. Letter sealer (only AFS)
On pressing the “Sealer ON/OFF“ key , you
whether mail items are sealed (ON) or not
sealed (OFF). There is no difference in put-
ting sealed or open envelopes in the feeder
AF. Functioning of the letter sealer (Letter
sealer ON) is shown in the start menus by a
stylized symbol next to the letter symbol (
).
When the letter sealer is switched on, this
key automatically activates “Seal-Only” at the
same time. In this case, the mail items will be sealed, but not franked.
Caution! If already sealed envelopes are used after you have pressed “Letter sealer
ON”, this can cause a paper jam because the feed tries to seal these envelopes
again.
5.1.1.1. “Seal-Only” mode
The “Seal-Only” mode is fetched by pressing
the key bearing these words.
The number of envelopes sealed is counted
in the “Seal-Only”mode by a separate coun-
ter. This is an easy way for you the keep
check of the total number of sealed enve-
lopes.
Press the “Reset Counters” key to set the quantity displayed on the counter to zero.
On pressing “Exit”, you abandon the mode “Seal-Only”.