Frama Matrix F4 / F6
47
6.3. Renaming cost centres and changing PIN
6.3.1. Changing cost centre PIN
As standard, a PIN protects the cost centre. In the as-delivered state of the franking system,
the PIN is the same as the cost centre num-
ber. The PIN can have up to 8 digits.
To change a cost centre PIN, proceed as fol-
lows:
Press the key “Change PINs/Names”. In the
administration mode, you can now select the
cost centre to be changed. In cost centre
mode you can only change the setting of the
current cost centre.
Press “Change PIN”
Enter the new PIN.
Enter the new PIN again.
The PIN of the selected or current cost cen-
tre has thus been changed.
In the administration mode, you have acess to all cost centres.
6.4. Changing cost centre name
Your Frama Matrix franking system offers you the possibility of assigning an individual name
to each cost centre. It is already shown in the cost centre selection and simplifies your work.
Select “Change Account Name”.
Proceed further as described in chapter 5.
Refer to the section “Enter text”.