Fractal Axe-Fx II XL, Руководство по началу работы

Страница: 17 / 42

CONNECTIONS
Doc v15XL
12
Doc v15XL
Axe-Fx II with Power Amp and Guitar Speaker 3.3.3
COMPONENTS:

Guitar
 Axe-Fx II

Power Amp and
Guitar Speakers
-OR-
Amp Head/Combo
with FX RETURN jack
(power amp input)
and Guitar Speakers
`
Global Settings: Power Amp Modeling ON or OFF (see below), Cabinet Modeling OFF
I/O Settings: Set
OUT1 MODE
as required for stereo or mono.
Notes: Depending on the character of the amplifier being used, Power Amp Modeling may need to be ON or OFF for
this type configuration.

Power Amp Modeling should be turned ON when using a “neutral-sounding” (Solid State) power amp that
does NOT significantly affect the tone or feel.

Power Amp Modeling should be turned OFF when using the RETURN on a tube head or combo, or a guitar-
oriented tube power amp—one that significantly affects to the tone and feel.

In either case, it is completely safe and reasonable to try both setting ways to see which you prefer.
Whenever you use the Axe-Fx II with traditional guitar speaker cabinets (whether open back or closed, small or
large, alone or in pairs) it is typically best to turn Speaker Modeling OFF (on the CONFIG page of the GLOBAL menu).
Guitar speakers differ from full-range speakers in that they are voiced with prominent, reduced highs, etc.
Note that some players actually prefer to use Power Amp and Cab modeling ON despite using real guitar speakers.
The settings required for this setup are not ideally suited for monitoring through the Axe-Fx II headphone jack, as
what you hear through headphones will not sound like what you will hear through the speakers.