Fractal Axe-Fx II XL, Руководство по началу работы

Страница: 33 / 42

Doc v15XL
28
Doc v15XL
6 Modifiers
Modifiers are used to remote-control or automate sound parameters. For example, you might attach an
expression pedal to a wah, volume, or whammy. Or use an LFO to modulate the pitch of a synth voice.
The process of creating a modifier begins at the parameter
you want to control. Parameters that can be controlled are
marked with a special symbol (left). Look for it beneath a
knob or to the right of a text parameter. If a modifier is already
present, the symbol will have a line through it (left bottom).
In the example (right)
MASTER
and
LEVEL
may be controlled with
modifiers.
LEVEL
has one assigned already.
To Create a Modifier…
 Select any controllable parameter ( ) and press the button to show the MODIFIER screen.
 Select a
SOURCE
to assign to the current parameter or choose NONE to remove an existing modifier. For more
on modifier sources, see the online PDF Axe-Fx II Owner’s Manual on our web site. Note: MFC-Expression
pedal jack 1 is factory configured for OUTPUT 1 VOLUME. MFC-101 XP2 is pre-configured for Axe-Fx
“EXTERNAL 1”

The modifier graph shows the relationship between the control source (x-axis) and the sound
parameter (y-axis). The “dot” in the graph tracks the SOURCE as its value changes.

You can set the range of the Modifier with the MIN and MAX parameters, or use START, MID, and END to
create custom curves.

AUTO-ENGAGE causes a block to engage/bypass based on the current value/position of the source.

You must STORE the current preset to make the modifier setting permanent.
To Remove a Modifier…
To remove a modifier, just change its
SOURCE
parameter to NONE.