Fractal Axe-Fx II XL, Руководство по началу работы

Страница: 8 / 42

HARDWARE Overview
Doc v15XL
3
Doc v15XL
2 Hardware Overview
The Axe-Fx II has a simple hardware interface with clearly labeled controls and jacks.
Review the following to familiarize yourself with the hardware features of the unit.
2.1 The Front Panel
Figure 2-1
1.
The Axe-Fx II is housed in a powder-coated steel enclosure with an anodized aluminum faceplate.
Dual front handles allow easy rack mounting and removal.
2.
The switch turns the unit on or off.
3.
The 160 × 80 pixel LCD is where all menu screens are displayed.
4.
and LED meters display the levels of incoming signals. See p. 9 for more on levels.
5.
LEDs communicate important events:

– This LED is lit when any change has been made to the current preset.

– This LED is lit while data is received at the MIDI IN port.

, – These flash briefly whenever the signal level at the corresponding output causes
the D/A converter to clip. See page 9 for more information on Setting Levels .
6.
In RECALL mode, the wheel selects and loads presets as it is turned.
In edit or menu screens, it changes the value of the selected parameter.
7.
The button executes commands, commits changes, accesses sub-menus, and more.
works for cancel, escape, and various other functions.
8.
In RECALL mode, the four buttons select and load presets. Up/Down = +/-1. Left/Right = +/10.
In edit or menu screens, buttons are used to select on-screen parameters and options.
9.
The buttons step through menu pages, shown as tabs at the top of the display.