Fractal Audio Axe-Fx III, Руководство пользователя

Страница: 40 / 151

34
5 PRESETS
TO BYPASS OR ENGAGE A BLOCK ON THE GRID…
Use
NAV
buttons to select the block.
Press the BYPASS button (Push-knob B). Bypassed blocks are dimmed or “grayed out” on the grid.
RESETTING A BLOCK/CHANNEL
Blocks on the Axe-Fx III are “initialized” when you place them on the grid, but you may want a fresh start after
making various changes. RESET takes only two button presses and can be performed at any time.
If it isn’t already open for editing, select the desired block on the grid and press EDIT.
Press the RESET button (Push-knob A). You are prompted to reset the current channel.
Press
ENTER
to confirm. You can reset other channels in a block as they are used.
SHUNTS
A shunt is a sonically transparent block—a mere tool which carries signal through otherwise empty grid locations.
Your preset will be silent unless you make a complete connection from the Input block to the Output block, so
place a shunt wherever you don’t use another block like an Amp, Cab, or effect. Like grid spaces, a shunt is stereo;
you don’t need two for left/right.
TO INSERT A SHUNT…
NAV to the desired grid location and turn
VALUE
until “SHUNT” is displayed.
Press
ENTER
to confirm or
EXIT
to cancel changes.
INPUTS AND OUTPUTS
Input and Output blocks are required to place input signals on the grid or pass signal to output jacks. All factory
presets use Input 1 and Output 1. Other setups may require different Input and Output blocks.
See “Input & Output Blocks” on p. 52 for additional information.
BLOCK DISPLAY TYPES
The color display shows different grid block states as follows:
AMP IN 1
1
A
CAB DRV
1
A
OUT 1
1
A
Bypassed Selected Normal Shunt Output Input