Fractal Audio Axe-Fx III, Руководство пользователя

Страница: 123 / 151

117
12 SETUP MENU
THE MIDI/REMOTE MENU
The MIDI/Remote menu contains global MIDI-related settings, and allows you to make assignments for Global
Controller functions including Block Bypass, Block Channel, the Looper, External Controllers, and more.

Reminder: You do not need to store settings in the
SETUP
menu. EXIT twice when finished.
MIDI/REMOTE: GENERAL PAGE
PARAMETER Description
MIDI Channel
1–16, OMNI Sets the channel on which the Axe-Fx III will receive MIDI messages.
“OMNI” causes the unit to respond to incoming messages on any channel.
Display Offset
0, 1 This causes Axe-Fx III presets to be numbered from 001 instead of from 000.
Display Offset only offsets the display (duh)... meaning that it does not change
which preset is actually loaded by a given footswitch or MIDI message.
Scene Revert
ON/OFF Selects between two different ways for scenes to work when you change them
via a Footswitch or MIDI:
OFF (Default): Scene edits are RETAINED across Scene changes as long as
you do not change PRESETS. So if you tweak Scene 1, switch to Scene 2, then
switch back to Scene 1, your tweaks will still be intact.
ON: Scene edits are LOST if you change the Scene without saving. So if you
tweak Scene 1, switch to Scene 2, then back to Scene 1, Scene 1 will have
reverted to its previously saved state. This makes Scene changes feel more like
traditional preset changes.
Program Change
ON/OFF Determines whether the Axe-Fx III will process or ignore incoming MIDI Program
Change messages.
Ignore Redundant PC
ON/OFF This setting determines whether the Axe-Fx III should re-process or ignore
a Program Change message that has already been processed to load the
current preset. With this setting “OFF”, a preset will be reloaded—all changes
discarded—when it is selected again via PC. This allows you, for instance, to
load a preset, use various “Instant Access” switches to bypass effects, and
then stomp the footswitch that originally selected the preset to have it revert to
its saved state. With this setting ON, redundant PC messages are ignored.
Send MIDI PC
1–16
OMNI
OFF
Determines whether or not the Axe-Fx III will automatically transmit a MIDI
Program Change message at its MIDI OUT port when a new preset is loaded.
This is the easiest way for most people to operate a single connected MIDI
device while changing presets on the Axe-Fx III. Any custom MIDI mapping
is left to the downstream device. To use this feature you simply select which
channel you want the message to be transmitted on. The “OMNI” setting
transmits the message on all channels.
MIDI PC Offset Adds a specified value to all incoming MIDI Program Change requests before
they are processed. This makes it possible, for instance, to address alternate
presets in different “registers”. You might use the same MIDI messages to
access presets 1–16 for a gig with one guitar, and —by specifying an offset
of +16— use presets 17–32 for a different guitar without re-programming your
controller.