Fracarro 3DG-2S2-2T, Руководство по эксплуатации

Страница: 6 / 44

6
English
5. PROGRAMMING INSTRUCTIONS
NB: The Control unit timeout is 5 minutes: after that time, if no other changes are made, the
control unit reinstates the last saved module configuration.
5.1 BASE PROGRAMMING FROM THE STATION
The 3DG-2S2-2T module can be programmed using the keyboard on the station control
unit.
To access the programming menu, press
√
and input the user code (default is 1234). To
change the 3DG-2S2-2T language enter the main menu in the control unit “LANGUAGE”,
and select the required language pressing
√
.
For all the programming activities and to understand the programming menus given in the
following flowcharts, refer to the key given below:
KEYBOARD KEY FUNCTION
or For confirming an entered value or entering the menu/submenu
or For deleting an entered value or exiting the menu
For navigating among the various items of the menu
For changing the parameters
For entering the values
For saving the changes
S
......
9
WXYZ
0
➤
➤
➤
➤
✗
➤
✓
➤
➤
➤