Fracarro 3DG-2S2-2T, Руководство по эксплуатации

Страница: 32 / 44

32
English
In the green option bar at the top select “operations” -> “load configuration”-> “from file”/”from
USB drive” to open the following screen, for example:
In this screen you can select the module where the configuration, which has been saved in a PC
file or a USB drive, should be loaded to. Select the file with the saved configuration and then
load the configuration).
The USB drive where the configuration has been saved or loaded must be in the control unit
USB port and not in the card port.
In the green option bar at the top select “operations” -> “factory default” or “operations” ->
“reboot” you can, respectively: reinstate the factory default parameters or reboot the module.
When this command has been given, the system will require a few seconds to complete the
operation, showing the “Wait” message in the meantime. You must wait until this operation has
been completed before performing any other operations, otherwise they may fail.