![Fracarro 3DG-2S2-2T Скачать руководство пользователя страница 10](http://html1.mh-extra.com/html/fracarro/3dg-2s2-2t/3dg-2s2-2t_operating-instructions-manual_2326108010.webp)
10
English
INPUT
Set frequency (SAT 1):
DiSEqC: allows setting the DiSEqC according to the satellite (A, B, C o D).
FREQ. (MHz): allows setting the extended frequency for the transponder to be received.
POLARITY: to set horizontal or vertical polarity.
TYPE LNB: to set the type of LNB.
SYMBOL RATE: allows setting the symbol rate for the transponder to be received.
Set IF frequency (SAT 1):
DiSEqC: allows setting the DiSEqC according to the satellite (A, B, C o D)
FREQ.IF (MHz): allows setting the IF frequency for the transponder to be received.
LNB: to set the type of LNB.
SYMBOL RATE: allows setting the symbol rate for the transponder to be received.
Measures (SAT 1)
Lock: to check whether the receiver has locked the signal or not.
Network name: - reading only – to check the transponder name.
BER: to view the BER (quality) of the input signal.
SNR: to view the signal/interference ratio of the input signal.
Common Interface (SAT 1)
Module name: to verify the common interface module name.
Enabled programs: to add or remove the programs to be decrypted.
Reset CAM: to reset the CAM
SAT 2= see SAT 1
BACK PANEL
Enable:
OFF: deactivates the TP input signal from the back panel
ON: enables the TP input signal from the back panel
OUTPUT
(mux 1)
Configuration:
Output frequency:
Bandwidth (only for modules set in DVB-T): to set the output channel bandwidth
from the available ones (6,7,8 MHz)
Frequency (MHz): to set the input channel frequency
Output channel:
Country: to set the installation country channels.
Output channel: to set the output channel.
Содержание 3DG-2S2-2T
