Fracarro 3DG-2S2-2T, Руководство по эксплуатации

Страница: 17 / 44

17
English
Operating instructions
The receiver input parameters can be set.
First of all, the input can be enabled or deactivated by flagging “enable” or otherwise,
consequently from the dropdown menu select whether to set the frequency or the IF frequency.
Selecting DiSEqC enables setting the DiSEqC according to the satellite (A, B, C or D).
A specific section enables writing the extended frequency or in 1IF of the transponder to be
received.
According to the selected frequency for the setting, the corresponding polarity can be selected.
The last item is used to set the symbol rate writing the extended rate in a specific section.
NB: for the changes to be effective, click on “Save”.
The right section contains additional detailed information with respect to the previous menus,
about the locked transponder, including: Lock, BER, SNR, Offset, Network ID, Original network
ID e Transport stream ID.
Click with the mouse on “Common Interface” to open the following screen: