FPS Image AnyPlace IA-200 Скачать руководство пользователя | Manualshive

Страница: 10 / 49

background image

User’s Manual 0020D1.01

Image AnyPlace IA-200

Do not use this unit near water; for example, near a bathtub, washbasin, kitchen sink or laundry
tub, in a wet basement, or near a swimming pool, water spa, or the like.

Heat

Do not use this unit near sources of heat, including heating vents, stoves, or other appliances that
generate heat. Also, do not place this product in temperature environments greater than 45ºC
(104ºF).

Mounting Surface

If not installing the unit in a standard equipment rack using the recommended mounting brackets,
place the unit on a flat, even surface. Do not place the unit on an unstable cart, stand, tripod,
bracket, or table. The unit may fall causing serious injury to a person and/or serious damage to
the appliance.

Portable Cart

An appliance and cart combination should be moved with extreme care. Quick stops, excessive
force, and uneven surfaces may cause the appliance and cart combination to overturn.

Ventilation

Locate the unit with adequate space around it so that proper heat ventilation is assured. Allow 10
cm (4 in) clearance from the rear and top of the unit, and 5 cm (2 in) from each side.

Slots and Openings

Slots and openings in the unit's case are provided for ventilation to ensure reliable operation of
the unit and to prevent overheating. These openings must not be blocked or covered. The
openings should never be blocked by operating the unit while placed on a bed, sofa, rug, or
similar surface. This unit should not be placed in a built-in installation such as a bookcase unless
adequate ventilation is provided.

Entry of Foreign Objects and Liquids

Never push foreign objects of any kind into this unit through the ventilation slots as they may
touch dangerous voltage points or short-circuit electrical/electronic parts that could result in fire,
or electric shock, or both. Never spill liquid of any kind onto the unit.

Electric Power

Only operate the unit from the type of electric power source indicated on the unit's labeling. If
you are not sure of the type of power supply that is available in your home or workplace, consult
your appliance supplier or local power company.

Grounding or Polarization

This unit is provided with a 3-pin, grounded, alternating current line plug. This plug will fit into
the power outlet only one way. This is a safety feature. Do not try to defeat the safety purpose of
the plug.

Power Cord Protection

Page 10 of 49

© Flexible Picture Systems

«
...
8
9
10
11
12
...
»

Содержание Image AnyPlace IA-200


















































Отзывы:

Нет отзывов

Похожие инструкции для Image AnyPlace IA-200

Бренд: Vdwall Страницы: 112

Бренд: Applica Страницы: 2

Бренд: SOLIS Страницы: 100

bit One HD Virtuoso

Бренд: Audison Страницы: 90

DOUBLE FORCE FP821

Бренд: Moulinex Страницы: 21

MOULINETTE 1.2.3 A327 Series

Бренд: Moulinex Страницы: 52

Masterchef 3000

Бренд: Moulinex Страницы: 76

mark levinson N 30

Бренд: Madrigal Audio Страницы: 25

Бренд: Philips Страницы: 40

Бренд: Philips Страницы: 3

Бренд: Yämmi Страницы: 247

R-5115 multimate

Бренд: Rohnson Страницы: 8

Thermomix TM 31

Бренд: Vorwerk Страницы: 52

Бренд: SEVERIN Страницы: 74

Бренд: SEVERIN Страницы: 112

SmartChef Digital V100

Бренд: Newlux Страницы: 96

Бренд: Matsui Страницы: 4

Бренд: Blaupunkt Страницы: 76

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды