Image AnyPlace
User’s Manual 0020D1.01
Warp Maps may be selected with the IR remote (using the dedicated eWarp button or by
navigating to the menu.) User Warp Maps may also be selected using the Control Protocol.
User Warp Maps are activated by selecting the User Warp Map Selection sub-menu from the
Projection sub-menu in the Advanced main menu. Up to 8 Warp Indices may be selected. User
Warp Maps Indices are grayed out if User Warp Maps have not been loaded into these locations.
Please note that aspect ratio treatments do not work with User Warp Maps. If you want to
configure different aspect ratio treatments in User Warp Map, you must create a specific User
Warp Map for each aspect ratio treatment that you wish to achieve.
Please refer to the
eWarp Designer 200 User’s Guide
for complete detail on how to create and
download User Warp Maps.
© Flexible Picture Systems
Page 37 of 49
