User’s Manual 0020D1.01
Image AnyPlace IA-200
Table 2: Setup Parameters
Parameter Description*
OUT = XXX ## Hz
Cycles through all of the available IA-200
output modes
(see
Table 3
for a list of Output Resolutions).
LCD Brightness =
On
(Off)
Turns On (Off) the 24 x 2 LCD Display during On Mode
BAUD = #####
Lets you choose a baud rate of 1200, 9600, 19200, 57600,
or
115000
.
OSD Location =
Input
(Output)
The OSD may be located pre (Input side) or post (Output
side) scaling and keystone correction
PC Control =
Active
(Inactive)
Turns On (Off) the computer control capability
DHCP =
Enabled
(Disabled)
Turns on Dynamic IP Address Selection
IP=aaa.bbb.ccc.ddd
Select IP Address (selectable only if DHCP = Disabled)
DNS=aaa.bbb.ccc.ddd
Select DNS Address (selectable only if DHCP = Disabled)
2
nd
DNS=aaa.bbb.ccc.ddd
Select Alternate DNS Address
(selectable only if DHCP = Disabled)
Gateway=aaa.bbb.ccc.ddd
Select Gateway Address (selectable only if DHCP =
Disabled)
SubMask=aaa.bbb.ccc.ddd
Select SubNet Mask (selectable only if DHCP = Disabled)
MAC = ## ## ## ## ## ##
Indicates the MAC Address of IA-200 unit
Serial No = ######
Indicates the Serial # of IA-200 unit
µProc Rev = #.##
Indicates the Rev # of the Front Panel microprocessor.
* The default parameters configurations are highlighted in bold.
Table 3: Output Modes
Output Mode
Comments
VGA 60 Hz (640 x 480)
VESA Standard
VGA 50 Hz (640 x 480)
VESA Standard
848 x 480 60 Hz
Panel timing
SVGA 60 Hz (800 x 600)
VESA Standard
SVGA 50 Hz (800 x 600)
VESA Standard
720p 60 Hz (1280 x 720)
SMPTE Standard
720p 50 Hz (1280 x 720)
SMPTE Standard
XGA 60 Hz (1024 x 768)
VESA Standard
XGA 72 Hz (1024 x 768)
VESA Standard
XGA 50 Hz (1024 x 768)
VESA Standard
1360 x 768 60 Hz
NEC timing
1365 x 768 60 Hz
NEC timing
1400 x 788 60 Hz
Panel timing
SXGA 60 Hz (1280 x 1024)
VESA Standard
Page 22 of 49
© Flexible Picture Systems
