Image AnyPlace
User’s Manual 0020D1.01
2 Installation and Operating Environment
2.1 Setting up Your IA-200
The IA-200 Quick Start Guide is intended to provide a quick list of steps that you can follow to
get things working in 95% of installations. Please refer to the
Quick Start Guide
for basic
installation instructions. This section and the subsequent User Interface is intended for more
advanced installations, problem solving and the general background of the product.
2.2 Standby
Mode
The IA-200’s power switch is located on the back of the system.
A momentary contact
Standby/Operate
button is located at the extreme left of the front panel
(and is also implemented as a red button on the IR Remote.)
Standby mode is a low power mode which suspends the IA-200’s output to the projector. During
Standby mode, the IA-200’s front panel display is active and Remote Control are active, but in a
different context. In addition to provide an
Instant On
IR response from its low power output
setting, the Standby state enables the user to adjust parameters that would generally not be
adjusted during normal OSD operation. One benefit of this operation is that the user cannot
make a casual OSD keystroke error that, for example, resets the display resolution to something
that the display cannot support (causing the screen to go blank and depriving the user of the
visual feedback that he needs to fix the problem).
2.3 Software Operating Environment
IA-200 comes with a CD with several different applications. Depending on your intended use,
you may require none, some or all of the applications. The Quick Start Guide describes how to
install the CD. This section briefly describes the software environment.
2.3.1 IA-200 Users (Keystone Correction Only)
No software is required (as long as you do not need to control anything over RS-232, USB or
Ethernet). All operation is achieved through the IR remote Control and OSD.
2.3.2 Router Manager
If you want to do anything else other than basic scaling and Keystone Correction, you need to run
Router Manager and install your specific IA-200. Router Manager is the common
© Flexible Picture Systems
Page 17 of 49
