Image AnyPlace
User’s Manual 0020D1.01
Output Mode
Comments
SXGA 50 Hz (1280 x 1024)
VESA Standard
SXGA+ 60 Hz (1400 x 1050)
VESA Standard
SXGA+ 50 Hz (1400 x 1050)
VESA Standard
1080p 60 Hz (1920 x 1080)
SMPTE Standard
1080p 50 Hz (1920 x 1080)
SMPTE Standard
1080p 48 Hz (1920 x 1080)
SMPTE Standard
QXGA 60 Hz (2048 x 1536)
-
QXGA 50 Hz (2048 x 1536)
-
QXGA 48 Hz (2048 x 1536)
-
UXGA 60Hz (1600 x 1200)
VESA Standard
1365 x 1024 50 Hz
JVC timing
1365 x 1024 60 Hz
JVC timing
1360 x 1024 60 Hz
JVC timing
1280 x 768 60 Hz
VESA Standard
Digital Cinema 60 Hz (2048 x
1080)
-
Digital Cinema 24 Hz (2048 x
1080)
-
WUXGA 60 Hz (1920 x 1200)
VESA Standard
1366 x 768
Panasonic Timing
Reserved 9
Reserved for future use
Reserved 10
Reserved for future use
Reserved 11
Reserved for future use
Reserved 12
Reserved for future use
3.2.1.3 Setting Up the Unit
On entry to the Setup mode, the 24 x 2 LCD display indicates the following:
IA-200
Setup
Select the
Menu
key on your IR remote to bring up the Setup Menu on the 24 x 2 LCD display.
The LCD display indicates the following:
Parameter = Value
Setup Mode
Using the
up/down
navigation keys on the remote, you can select the next parameter in a circular
list of parameters. Using the
left/right
navigation keys on the remote, you can select the value of
the parameter. In some cases, the parameter is visible in the setup menu, but may not be altered
(such as Serial Number or MAC Address).
Selection of IP addresses is slightly different. IP addresses may only be selected if the DHCP
parameter has been set to "Off". In this case, you use the
left/right
navigation key to "enter" the
© Flexible Picture Systems
Page 23 of 49
