Foxpro Krakatoa 2, Инструкция по эксплуатации

Страница: 49 / 53

49
Keep it clean! Our products are designed to be used outdoors and as a result, they can get dirty
from time to time. While the dirt may add a bit of character and show that you use it frequently
and hard, it is recommended that you spend a few moments after each hunt or at the end of
the season prior to storage to clean it up a bit. Total disassembly won’t be required, just remove
any debris, sticks, leaves, dirt, or anything else that shouldn’t be there. If dirt or foreign objects
make their way into the machine, it can cause problems down the road.
Store in a dry location! If you are planning on storing the unit away for the summer, it is
recommended to keep the unit in a dry location that is not prone to drawing moisture. It is also
recommended to remove all batteries prior to removal.
Check it out before heading into the field!
If you are getting your caller out for the first time
this season, take it out back and check it out before you head out on a hunt. Check your remote
range, fidelity, high volume, low volume, battery life, etc. Being prepared and ensuring proper
functionality before heading out on a trip can help you decide if you need new batteries, if it
needs service, or if everything is working well. This can help prevent cancellation of trips and
potential disappointment.
15. Troubleshooting
This section covers the troubleshooting aspects for the KRAKATOA II and KRAKATOA II remote
control. The most common problems are battery related. Before performing anything else, try
installing fresh batteries. When your batteries get low, in either the KRAKATOA II or the
KRAKATOA II remote, unexpected operation can occur. You can experience such things as loss
of audio quality, loss of remote control range, and other abnormal results.
Problem Solution
KRAKATOA II will Not Turn On Make sure the batteries are fully charged. Inspect the
battery connector wires and make sure they connected
and not corroded. Make sure the battery terminals show
no signs of corrosion.
KRAKATOA II does not
produce any sound Check that the speakers are not turned off in the
KRAKATOA II remote control. Try connecting the
KRAKATOA II to a computer and inspecting the sound files
for missing files or signs of corruption.
KRAKATOA II remote not
controlling KRAKATOA II Make sure that the remote and caller are set to the same
channel of operation. Then turn off the caller and remote,
wait a few moments, turn them back on and try operating
again.
KRAKATOA II remote does not
turn on Try replacing the batteries.
KRAKATOA II remote stuck on
start-up screen Try replacing the batteries.
Cannot control external If you are using a FOXPRO Jack Predator Decoy, make sure