10
1-5
Krakatoa II Remote: Requirements
The Krakatoa II remote control operates on 3 ‘AA’ batteries. It is recommended that you use
high quality lithium or alkaline batteries for the best performance.
Installing Batteries in the Krakatoa II Remote
1.
Access the battery compartment by removing the door from the back of the remote.
The door slides down and off of the remote.
2.
Place the batteries into each battery cavity while observing polarity as indicated.
3.
Slide the battery compartment door back on the remote.
2.
Quick Start Guide
The following Quick Start Guide provides a very brief overview of basic operations such as
playing sounds, adjusting volume, and using presets. While this may be enough to get you
started, it is strongly recommended that you read the manual in its entirety to fully understand
all of the capabilities and get the most out of the product.
2-1 Powering On the Krakatoa II
The Krakatoa II is powered-on by moving the power switch to the on position. When powered-
on, the orange LED pilot lamp will blinks rapidly several times and then illuminates solidly,
signaling that it is ready to be operated from the remote control.
2-2 KRAKATOA II Remote Setup
After installing batteries or changing batteries in the KRAKATOA II remote, it is recommended
that you make it a routine to take a moment to setup the date and time settings. This section
will explain these setup configurations.
Setting the Clock:
1.
Access the Date/Time(r) menu and select “Time”
2.
Use the scroll buttons to set the current time.
3.
Push “Play/Select” to lock it in.
The clock can be displayed in either the standard 12 hour format or 24 hour format (military
time).
Configuring Time Format:
1.
Access the Date/Time(r) menu and select “Time Format”
2.
Use the scroll buttons to select either 12 or 24 hour time format.
3.
Push “Play/Select” to lock in the setting.
Содержание Krakatoa 2
Страница 1: ......
