Appendix
112
400M01 Series User Manual
C. Select Boot Array
User can select a disk array as boot device if user wants to boot operating
system from an array. Boot disk array cannot be selected if the operating system
does not boot from the disk array. Highlight the
Select Boot Array
item; press
<Enter> and the channel column will be activated. Then highlight the target disk
array and press <Enter>. If user selects a disk array that has a boot mark and
press <Enter>, its boot setting will be canceled.
D. Serial Number View
Highlight
Serial Number View
and press <Enter>. Use arrow key to select a
drive, the selected drives serial number can be viewed in the last column. The
serial number is assigned by the disk drive manufacturer.
400M01-FOXCONN-V1.0-BIOS-en-030304.p65
2004-3-18, 13:49
112
