Appendix
110
400M01 Series User Manual
c. Guide to Configure JBOD
STEP 1: Select the option
Create Array
in the
main menu of
BIOS configura-
tion utility, then press <Enter> key.
STEP 2: Select the option
Array Mode
, then press <Enter> key to display the
pop-up menu of RAID system setting.
STEP 3: Select
RAID SPAN for capacity
from the menu and press <Enter>.
From this point, you may choose to auto-configure the RAID array by
selecting
Auto Setup for Capacity
or manually configure the RAID
array for striped sets. Please continue with the next step if you want to
manually configure the RAID array. Otherwise, proceed to step 3-3.
3-1.
Select the option
Select Disk Drives
, then press <Enter>. Use arrow
keys to select disk drive(s), then press <Enter> to mark selected drive.
An asterisk is placed before the selected drive.
3-2.
Select the option
Start Create Process
and press <Enter> to setup
hard disk for RAID system.
3-3.
Then the confirmation message appears:
The data on the selected disks will be destroyed. Continue? (Y/N)
Press <Y> to confirm or <N> to return to the configuration options.
400M01-FOXCONN-V1.0-BIOS-en-030304.p65
2004-3-18, 13:49
110
