Appendix
109
400M01 Series User Manual
b. Guide to Configure RAID 1
STEP 1: Select the option
Create Array
in the
main menu of
BIOS configura-
tion utility, then press <Enter> key.
STEP 2: Select the option
Array Mode
, then press <Enter> key to display the
pop-up menu of RAID system setting.
STEP 3: Select
RAID 1 for data protection
from the menu and press <Enter>.
From this point, you may choose to auto-configure the RAIDarray by
selecting
Auto Setup for Data Security
or manually configure the RAID
array . Please continue with the next step if you want to manually con-
figure the RAID array. Otherwise, proceed to step 3-3.
3-1.
Select the option
Select Disk Drives
, then press <Enter>. Use arrow
keys to select disk drive(s), then press <Enter> to mark selected drive.
An asterisk is placed before the selected drive.
3-2.
Select the option
Start Create Process
and press <Enter> to setup
hard disk for RAID system.
3-3.
Then the confirmation message appears:
Save the data on source disk to mirror after creation? (Y/N)
Press <Y> to confirm or <N> to return to the configuration options.
400M01-FOXCONN-V1.0-BIOS-en-030304.p65
2004-3-18, 13:49
109
