Fourier DataNet, Руководство пользователя

Страница: 41 / 212

31
Note: By going to Tools > Switch Sensor View Mode you
can reduce the size of the sensor window to display only the
sensor type and sensor data. Recommended for networks
with many loggers.
2.8. Optimizing the Network
This section outlines a number of features and suggestions for
optimizing the DataNet network and getting the best
performance out of the end units and parent units.
For example, when you first setup your network, you want to
ensure that the loggers are placed in the optimum position in
order to receive and transmit data to/from the DataNet
software.
Refer to the DataNet specifications to guide you on the range
of the DataNet units. With this knowledge, and based on the
layout of your facility, you should have a good idea of the
likely positional layout of your units.
2.8.1. Signal Test Utility
Rather than setup the system on a trial and error basis,
DataNet has a
Signal Test utility built in to the logger
firmware, which gives you a clear idea of the strength of the
signal of each logger to the Receiver, and the quality of the
data link between Receiver and logger.
Perform the following test on each logger in your system while
deciding where to position the logger:
1. Using
the Scroll button, scroll through the main menu on
the logger until you reach the following display: