Fostex DV-40 Скачать руководство пользователя страница 161

Страница: 161 / 182

DV40 Owner’s Manual (Version V1.2 Supplement>

<10> Addition of “Default TrkName?” SETUP Menu

A new “

Default Trk Name?

” SETUP menu sets the default track name automatically added to

the BWF Sequence Descriptor when the “NEW FILE” recording mode is committed.

• Setting Default Trk Name

1. While the unit is in STOP mode, press the [SETUP] key to enter the SETUP mode.

<NOTE>

The default track name is added to a BWF file created by the “

NEW FILE

” recording mode only. It is

not added to a SDII file.
The default track name is memorized in the internal flash ROM.

2. Select the “Default TrkName?” menu by the JOG dial and press the [ENTER/YES] key.

The display changes to the track select condition. (The default setting “

track1

” is displayed.)

In this condition, by rotating the JOG dial, the track 1 ~ 4 can be selected.

Tips:

Pressing the

[F4]

key on the PS/2 keyboard allows to directly access the ìDefault Trk Name?î

SETUP menu.

SETUP

3. After selecting a desired track (1 ~ 4), press the [ENTER/YES] key.

The 1st digit (left end) of the track name starts flashing.

Flashing

<NOTE>

The before mentioned “

Edit Descriptor?

” menu should be used to change the file name in which

the default track name is added.

4. Press the [MARGIN SET/CLR] key several times and clear the currently displayed track name.

5. Input a desired track name by the JOG dial (or 10 key) and press the [ENTER/YES] key.

6. In order to input a track name on other track, repeat the above procedures 2 ~ 5.

7. After inputting a track name is completed, press the [EXIT/NO] key (or [STOP] key) to exit from the

SETUP mode.

Flashing

Содержание DV-40























































































































































































Результаты поиска

Содержание DV-40

Отзывы:

Похожие инструкции для DV-40

Бренды по названию

Популярные бренды

Fostex DV-40, Руководство по эксплуатации

Результаты поиска

Содержание DV-40

Отзывы:

Похожие инструкции для DV-40

Бренды по названию

Популярные бренды