manualshive.com logo in svg

Fostex DV-40, Руководство по эксплуатации

Поделиться
Скачать
Fostex DV-40 Скачать руководство пользователя страница 174

Model DV40 Owner’s Manual <Version V1.3 Supplement>

<2> Single File Maximum Recording Capacity Select Function

The maximum recording capacity of a single audio file (either BWF or SDII) was limited to 2GB
on DV40 until now. Updating the software to V1.3 allows selecting either a 2GB or 4GB maxi-
mum file recording capacity. Selection can be made by the new "

Max File Length?

" SETUP

menu.

<NOTE>

• There is a case that an audio file larger than 2GB cannot be correctly recognized by a PC.

In such a case, use the new "

Divide File?

" function in the AUDIO EDIT menu to divide the audio

file. Refer to the next section for details.

• When a DVD-RAM disk with a 4GB SDII audio file recorded on it is inserted into a DVD-RAM drive

connected to a Macintosh computer, there may be a case that all the files in the SDII folder cannot
be seen.

• If the 4GB maximum recording capacity is selected and a DVD-RAM disk is formatted in TAPE

mode, only one audio file will be created.

1. While the DV40 is in STOP mode, press the [SETUP] key.

The SETUP menu is displayed.  In the recalled SETUP menu, the default setting is "

Adjust RTC?

".

2. Select the "Max File Length?" SETUP menu by rotating the JOG dial (or press the [SKIP/CURSOR

|<</>>|] key) and press the [ENTER/YES] key.

The default maximum file capacity "

2100.0

" flashes.

Setting Maximum recording capacity

MB

SETUP

3. Select "4200.0" by rotating the JOG dial (or press the [SKIP/CURSOR |<</>>|] key) and press the

[ENTER/YES] key.

The maximum file capacity is set to 4GB (4200.0) and "

?

" flashes.

MB

SETUP

4. Press the [EXIT/NO] key (or [STOP] key) to exit from the SETUP menu.

5. If you prefer to record in the TAPE mode, select "Tape" / "New" format in the "Format?" Utility menu

and format the DVD-RAM disk again.

MB

SETUP

MB

SETUP

Flashing

Flashing

Flashing

Flashing

5

Содержание DV-40























































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды