Fortress Technologies An E1T Timepiece Скачать руководство пользователя страница 38

Страница: 38 / 129

For example: You live in San Diego, CA. It is summer time. You want to set the clock to 12:35:00

local time. San Diego uses daylight saving so the local time without daylight saving is 11:35:00.

San Diego is Pacific Time which is UTC-8 hours, therefore the current time in UTC is +8 hours so is

19:35:00 and this value should be entered into the clock.

Timeset.nug

takes over most of the IR handset keys. When the Nuggle program is run the tubes

will display the current UTC hours and minutes from the RTC with the seconds set to zero. The

bling around the leftmost tube, tens of hours, will light showing that tube is selected and its value

can be changed. The IR handset keys are used as follows:

•

'0' .. '9' key value is applied to the selected tube. The selected tube moves one to the right. The

units seconds tube rolls over to the tens of hours tubes. Using these numerical keys you can

dial in a new UTC time.

•

'|<<' or Prev key will move the selected tube one position to the left. The leftmost tube rolls

under to the rightmost tube.

•

'>>|” or Next key will move the selected tube one position to the right. The rightmost tube rolls

over to the leftmost tube.

•

'EQ' key accepts the UTC time as shown and writes the time to the RTC that will immediately

start using it. The clock will then change to show the face that was shown before this face was

selected.

•

'>||' or Play key acts as a cancel or escape key, the time shown is abandoned and the clock will

then change to show the face that was shown before this face was selected.

If an illegal entry is attempted, for example pressing '4' when the tens of hours tube is selected,

then a warning chime will sound and the value shown on the tube will not change.

All keys not listed here will retain their default function, for example, pressing the '+' key will still

increase the chime volume. Additionally, moving the rotary encoder will change the face selected

and so effectively cancel the set time function.

Internally the clock works entirely in UTC and not the local date. Therefore, if you are setting the

clock date, for example you do not have the WiFi or GPS modules to do this for you, then you

must be prepared to enter the date in UTC by taking into account your time zone and daylight

savings.

Face number

961

Nuggle file

dateset.nug

Description

Allow the RTC UTC date
setting to be edited using the
IR handset.
A full description follows this
table.

Colons

None

Bling

The tube position that can
currently be changed is lit with
red bling. All other tube bling
remains dark.

Chimes

uhoh.wav, out.wave, notify.wav

Page 38

Version 1.0

Содержание An E1T Timepiece


































































































































Результаты поиска

Содержание An E1T Timepiece

Отзывы:

Похожие инструкции для An E1T Timepiece

Бренды по названию

Популярные бренды

Fortress Technologies An E1T Timepiece, Руководство пользователя

Результаты поиска

Содержание An E1T Timepiece

Отзывы:

Похожие инструкции для An E1T Timepiece

Бренды по названию

Популярные бренды