Fortress Technologies An E1T Timepiece Скачать руководство пользователя страница 11

Страница: 11 / 129

Atmel Licence

The Fortress firmware makes extensive use of the Atmel libraries. The Atmel License (also given

in every Atmel library file) is

License

Redistribution and use in source and binary forms, with or without modification, are permitted

provided that the following conditions are met:

1. Redistributions of source code must retain the above copyright notice, this list of

conditions and the following disclaimer.

2. Redistributions in binary form must reproduce the above copyright notice, this list of

conditions and the following disclaimer in the documentation and/or other materials

provided with the distribution.

3. The name of Atmel may not be used to endorse or promote products derived from this

software without specific prior written permission.

4. This software may only be redistributed and used in connection with an Atmel micro-

controller product.

THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED

WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF

MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE

EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY

DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES

(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;

LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON

ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING

NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,

EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

My distribution of the Atmel libraries as part of the open source firmware is in compliance with

this license.

For further information visit

http://www.microchip.com

LUFA Licence

The Fortress uses an custom SAM3X8C core board and as such makes use of a programmer that

uses LUFA.

LUFA Library

dean [at] fourwalledcubicle [dot] com

www.fourwalledcubicle.com

Now owned by MicroChip

Page 11

Version 1.0

Содержание An E1T Timepiece


































































































































Результаты поиска

Содержание An E1T Timepiece

Отзывы:

Похожие инструкции для An E1T Timepiece

Бренды по названию

Популярные бренды

Fortress Technologies An E1T Timepiece, Руководство пользователя

Результаты поиска

Содержание An E1T Timepiece

Отзывы:

Похожие инструкции для An E1T Timepiece

Бренды по названию

Популярные бренды