Fortress Technologies An E1T Timepiece Скачать руководство пользователя страница 50

Страница: 50 / 129

For example:

DATG

“get” the current date

VERR

“report” hardware/firmware version and build information

SYSU

"use" the system - a parameter sets how

LDR?

“help”, LDR help information

LEDK

“kill”, turn all bling LEDs off

Some commands have mandatory parameters, for example:

TIMS

12:00:00

“set” the TIMe to midday

OUTS

6,1

“set” digital OUTput for the 6.3V heater (6) supply on (1)

OUTS

300,0

“set” digital OUTput for the 300V HT (300) supply off (0)

In all cases the 3 letter name with a ? will list the actions for it, together with any mandatory or

optional parameters.

Typing the command HELP will list the available commands

Command entry

Commands are entered at a '>' text prompt. If the prompt is not there press return key and a '>'

should appear.

The entry editor is very simple. With only the following control keys having a use:

•

Backspace (BS) - deletes the last character typed or is ignored at the start of the line

•

Escape (Esc) - deletes the whole entry

•

Return - enters the command for use

ADC readings and interpretation

The Fortress E1T clock uses four ADC channels to sense the main board hardware version, sense

the plug-in board, measure the ambient light level and to report the SAM3X8C core temperature.

See also the LDR commands for more information on that channel.

Beep tester

The clock can make beep-beep noises (but the clock is not a Teaser) using a two channel PWM

generator. It is used for warnings, making irritating noises when the rotary encoder is moved or a

key is pressed on the IR handset and can be used to play simple tunes.

ADC?

ADC command help message

ADCR

Report the current ADC values and offer interpretation of the hardware channels
and convert the SAM3X8C core temperature into °C

https://hitchhikers.fandom.com/wiki/Teaser

Page 50

Version 1.0

Содержание An E1T Timepiece


































































































































Результаты поиска

Содержание An E1T Timepiece

Отзывы:

Похожие инструкции для An E1T Timepiece

Бренды по названию

Популярные бренды

Fortress Technologies An E1T Timepiece, Руководство пользователя

Результаты поиска

Содержание An E1T Timepiece

Отзывы:

Похожие инструкции для An E1T Timepiece

Бренды по названию

Популярные бренды