Fortress Technologies An E1T Timepiece Скачать руководство пользователя страница 63

Страница: 63 / 129

The converted data is saved to a directory called CHIMES in the root directory of the SD card. For

a given WAV file, two files with the same name are created with extensions CHM containing the

DAC ready data and HDR containing set up data such as the sample rate and information about

the original data, such if it was mono or stereo.

The console menu command

CHMC

is used to run the WAV file pre-processor. To connect the

console see section 3 above and to use the menu commands, section 4.

Before giving the CHMC command ensure that the RTC contains the correct data and time as the

file timestamps are used to determine which WAV files need to be updated.

When the command is given all clock functions are stopped and, if connected, the USB drive is

disconnected by the firmware. The clock firmware then:

•

Creates the CHIMES directory if it does not exists

•

Scans the WAV directory for WAV files

•

If the corresponding CHM and HDR files don't exist in the CHIMES directory then it

creates them and proceeds with the conversion

•

If the CHM and HDR files exist then it replaces them if the WAV file is newer

•

When all the conversions have been completed the Fortress E1T Clock resets itself and the

clock restarts.

N.B. The file pre-processor is quiet a slow operation. Conversion of a file can take several seconds

to many minutes. So if you converting several files then go and make a cup of coffee and have a

piece of cake...

Other useful menu commands

CHMK

Chime Kill

Stop the chime currently playing

CHMR

Chime Report

List all the preprocessed files available with some key data

CHMU

name

Chime Use

Play the given named chime

Un-fragmented File Requirement

For speed, the chime CHM files are read directly by the low-level disc functions and not using the

higher level FAT32 functions. To play correctly, this means that a CHM file must not be

fragmented. If a chime “breaks up” when playing then it is an indication the the file is fragmented.

The best process to defragment an SD card is to copy the files contents to a directory on your PC.

Delete all of the SD card contents. The copy the saved copy back again. I do not recommend

using a defrag tool on the SD card.

You'll need to keep a copy of the SD card contents as a back up in any case.

Using new chime files

The chimes are played by statements in the Nuggle file that displays a give clock face. If you have

replaced a file with the same name then the Nuggle will use the new file. Otherwise you will need

to edit the Nuggle text - this is not at all difficult - see the next section.

Page 63

Version 1.0

Содержание An E1T Timepiece


































































































































Результаты поиска

Содержание An E1T Timepiece

Отзывы:

Похожие инструкции для An E1T Timepiece

Бренды по названию

Популярные бренды

Fortress Technologies An E1T Timepiece, Руководство пользователя

Результаты поиска

Содержание An E1T Timepiece

Отзывы:

Похожие инструкции для An E1T Timepiece

Бренды по названию

Популярные бренды