manualshive.com logo in svg

Fortinet AP400 Series, Руководство по установке

Поделиться
Скачать
Fortinet AP400 Series Скачать руководство пользователя страница 84

 Warnings

70

Una advertencia le llama la atención sobre cualquier posible peligro que pueda ocasionar 
daños personales o la muerte. A continuación se dan las advertencias utilizadas en este man-
ual.

With plastic covers removed, this product is suitable for use in environmental air space in accordance 
with the Section 300-22(c) of the National Electric Code and Sections 2- 128.12 - 010 (3) and 12 - 100 
of the Canadian Electrical Code. Part 1. C22. 1. For other countries, consult local authorities for regula-
tions.

Bei abgenommener Kunststoffabdeckung ist dieses Produkt zur Verwendung in einem Umgebung-
sluftraum gemäß Abschnitt 300-22(c) des National Electric Code und Abschnitt 2- 128.12 - 010 (3) und 
12 - 100 des Canadian Electrical Code Teil 1. C22.1 geeignet. Die Vorschriften für andere Länder sind 
bei den örtlichen Behörden erhältlich.

Sous réserve que ses couvercles de plastique soient déposés, cet appareil est adapté à une utilisation 
dans les vides de construction des bâtiments selon la section 300-22(c) du code NEC (National Electric 
Code) et les sections 2- 128.12 - 010 (3) et 12 - 100 du Code électrique du Canada, partie 1. C22. 1. 
Pour tous les autres pays, consulter les organismes de réglementation locaux.

Una vez desprendidas las cubiertas de plástico, este producto es adecuado para su uso en el espacio 
aéreo circundante en conformidad con la sección 300-22(c) del National Electric Code (Código Eléc-
trico Nacional de EE.UU.) y las secciones 2- 128.12 - 010 (3) y 12 - 100 del Código Eléctrico de 
Canadá. Parte 1. C22. 1. En otros países, consulte a las autoridades locales competentes para infor-
marse acerca de las normativas vigentes.

Any Fast Ethernet (FE) cables installed in air-handling spaces should be suitable under NEC Article 
800.50 and marked accordingly for use in plenums and air-handling spaces with regard to smoke prop-
agation, such as CL2-P, CL3-P, MPP (Multi Purpose Plenum), or CMP (Communications Plenum).

Alle Fast-Ethernet (FE)-Kabel, die in Lüftungsräumen installiert werden, sollten gemäß NEC Artikel 
800.50 geeignet sein und entsprechend zur Verwendung in Hohlräumen (Plenum) und Lüftungsräumen 
im Hinblick auf Rauchausbreitung gekennzeichnet sein, z.B. CL2-P, CL3-P, MPP (Multi Purpose Ple-
num) oder CMP (Communications Plenum).

Les câbles Fast Ethernet (FE) installés dans un vide d’air doivent correspondre aux critères de l’article 
800.50 du code NEC et identifiés en conséquence comme adaptés à une utilisation dans les vides de 
construction des bâtiments en matière de propagation de la fumée (marquages CL2-P, CL3-P, MPP 
(Multi Purpose Plenum) ou CMP (Communications Plenum)).

Todos los cables Fast Ethernet (FE) instalados en espacios aéreos deben cumplir con el artículo 
800.50 del NEC y estar marcados adecuadamente para su uso en espacios aéreos y plenums en lo 
concerniente a la propagación de humo, tales como CL2-P, CL3-P, MPP (Plenum multifuncional), o 
CMP (Plenum de comunicaciones).

Содержание AP400 Series







































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды