Fortinet AP400 Series, Руководство по установке

Страница: 48 / 102

Install the AP433e 34
Figure 15: Ports and Unlock Mechanism for the AP433e
3.
Align the mounting bracket with the AP433e slots used for the ceiling t-bar in “Mount
AP433e Below a Suspended Ceiling” on page 29 .
4.
Press down on the tab indicated on the underside of the AP and twist the AP into place.
5.
Push down on the thumbscrews provided on the mounting bracket and clip it to the ceiling
bar that will support the AP.
6.
Tighten the screws to ensure that the mechanism stays locked in place.
7.
Connect one end of the CAT5 (or greater) Ethernet cable with PoE to the Ethernet con-
nector shown in
Figure 15 on page 34 above.
Mount AP433e on an Interlude T-Bar
The mounting procedure for a ceiling that has interlude T-Bar supports is similar to that of
mounting on a suspended ceiling. However, this procedure requires a specialized mounting
bracket (MNT-SCRMKIT-04), as depicted in
Figure 16 on page 35 .
RESET
USB
CONSOLE
G1
Console
port Ethernet
port USB
port
00260
Unlock
Be sure to connect the Ethernet cable to the Ethernet port. The cable can mistakenly be plugged into
the Console port; if you do this, the AP won’t power up.