Fortinet AP400 Series, Руководство по установке

Страница: 55 / 102

Installing AP433i 41
The AP433i has a security cable slot so you can lock the AP433i with a standard security
cable, such as those used to secure laptop computers.
Purchase optional mounting kits to mount the AP433i either from the ceiling or inside an
enclosure:
• Above Suspended Ceiling Mounting Kit (T-Bar Hanger): MNT-SCRMKIT-01
To complete AP433i installation, you need the items listed below.
Additional Equipment
A power source is needed to power the AP433i. See “Determine Power Requirements” on
page 40 .
Installing AP433i
Select a Location
All AP433i interconnected equipment must be contained within the same building, including
the interconnected equipment's associated LAN connection. Ceiling mounting is recom-
mended but wall mounting is also supported. In addition, the AP433i should be mounted in a
location that meets the following conditions:
•
Relatively unobstructed access to the stations the AP serves. Select a location with minimal
physical obstructions between the AP and the wireless stations. In an office with cubicles,
mounting the APs below a hanging ceiling (plenum is supported) or the wall near the ceiling
Installation Type Items Required
Horizontal mounting None
Vertical mounting over a wall stud
• Four #6 x 2" wood screws for a wood stud; or
•
Four #6 x 1½” metal screws for a metal stud
• Mounting bracket
Vertical mounting on sheetrock
• Four #6 x 1" screws
•
Four #4-6 x 7/8” ribbed plastic wall anchors
• Mounting bracket
Horizontal mounting below a hanging
ceiling None
Mounting above a ceiling tile Mounting bracket MNT-SCRMKIT-01