Fortinet AP400 Series, Руководство по установке

Страница: 40 / 102

Install the AP433e 26
TABLE 1: Antenna Mappings
Install the Access Point
AP433e ships with a mounting bracket included in the box. This bracket is intended for instal-
lation as a wall-mount; for mounting on a ceiling, no mount is typically required. See the fol-
lowing sections for more specific details.
•
“Mount AP433e Horizontally on a Shelf” on page 26
• “Mount AP433e Vertically on a Wall” on page 26
•
“Mount AP433e Below a Suspended Ceiling” on page 29
• “Mount AP433e Above a Suspended Ceiling (Plenum)” on page 30
•
“Mount AP433e on a Dropped Ceiling Bevel Tile” on page 33
• “Mount AP433e on an Interlude T-Bar” on page 34
Mount AP433e Horizontally on a Shelf
When mounting an AP433e horizontally, no mounting bracket is required. Be sure to position
the antennas vertically when an AP433e sits on a surface. In order to ensure that the AP433e
does not shift much, attach the rubber feet provided in the box to the bottom of the AP.
Mount AP433e Vertically on a Wall
To mount an AP433e on a wall, use the provided mounting bracket, as shown in Figure 7 on
page 27 .
Antenna Radio/Channel
1 Radio 1, Channel 0
2 Radio 1, Channel 1
3 Radio 1, Channel 2
4 Radio 2, Channel 0
5 Radio 2, Channel 1
6 Radio 2, Channel 2
7 Radio 3, Channel 0
8 Radio 3, Channel 1
9 Radio 3, Channel 2