10
Chapter 1 Before Operation
4. LCD Touch Panel
Cautions in using the touch panel
• The touch panel is designed to touch lightly with a finger or a pen (its tip radius is 0.8 or smaller).
Do not press the panel strongly with a finger or push it with any sharp objects (such as a fingernail, ball-
point pen, and pin).
• If you perform the following operations, the touch panel may not work even though you are touching it.
Additionally, note that such operations may cause malfunction of the machine.
- Operation with the tip of a nail
- Operation with a foreign object placed on the touch panel
- Operation with a protective sheet or sticker applied on the touch panel
- Operation with the touch panel being wet
- Operation with a finger wet with sweat or water
The following terms are used when explaining screen operation in this document.
Terms
Description
Touch
Lightly touching an item such as a key once with your finger.
Press and hold
Pressing an item such as a key for more than 1 second.
The press-and-hold key is surrounded by a double frame (
).
5. Screen Configuration
5-1. [Ready] screen/[Processing] screen
The following are the first screen displayed when the power is turned on, and the processing screen.
When [Initial] is set to other than [Ready], the screen that you set is displayed.
[1]
[2]
[3]
[1]
[2]
[Processing] screen
[Ready] screen
No.
Name
Function
[1]
Touch panel display
Icons and numerical values of the specified paper size, folding mode, etc.
are displayed
[2]
Touch panel operation section
Contains keys to change settings such as processing speed and folding
mode.
[3]
Page name
The name of the displayed page. The name is displayed on all the screens
except the screen when an error occurs and the processing screen. [Ready]
is displayed on the top screen.
