35
Chapter 2 Basic Operation
5
Touch [Air Adjust].
The [Air Adjust] screen is displayued.
[a]
6
Set [Separating Air],[Pickup Air] and
[Side Air].
• Adjust a value using [–] or [+].
• To enter a value, touch [a]. The numeric
keypad is displayed.
• The appropriate value for the searating
air and pick up air vary depending on the
paper type and ream weight.
7
Touch the
key.
The value is confirmed.
• The volume of [Air Adust] can be checked
by pressing the
key or
key while [Air
Adjust] window is displayed.
• Press either of the
key or
key to stop
separating air.
• When the air volume is appropriate, the
paper does not flap but it floats as air
reaches the rear end of paper as shown in
the right figure.
8
Check that the separating air
adjustment knob is set to [2].
• Larger settings increase and smaller settings
decrease the amount of air.
• Set the air volume to [4] to [5] as paper is
heavy when handling large size paper.
• Set the knob to [1] when using small size thin
paper.
