13
Chapter 1 Before Operation
5-1-2. Touch panel operation section
[6]
[7]
[9]
[10]
[11]
[1]
[2]
[3]
[4]
[5]
[1]
[2]
[8]
[Processing] screen
[Ready] screen
[12]
No.
Name
Function
[1]
(Processing speed down)
key
The processing speed is slowed each time the key is touched.
When processing speed is set to “1-”, the key is grayed out and cannot be
operated.
Adjustable range: 1- to 7
[2]
(Processing speed up)
key
The processing speed is sped up each time the key is touched.
When processing speed is set to [7], the key is grayed out and cannot be
operated.
Adjustable range: 1- to 7
[3]
(Folding mode selection)
key
When the key is touched, the [Folding Mode] screen is displayed.
When the machine is set in custom folding mode, you can switch the
folding mode to standard folding of non-standard paper by using this key.
[4]
(No. of sheet setting) key The [No. of Sheet] screen is displayed when the key is touched.
[5]
(Clear) key
Press and hold to clear the counter.
When a numerical value is entered, the value is set to the initial value.
[6]
(Air adjustment) key
Touching the key displays the [Air Adjust] screen.
[7]
(Basic settings) key/
(Function settings) key
When the machine is set to the mode other than the stopper fixed
mode, this icon is displayed.
The [Basic Settings] screen is displayed when the key is touched.
Select either standard folding, standard folding for non-standard size, or
custom folding.
When the machine is set to the stopper fixed mode, this icon is
displayed.
The [Function Settings] screen is displayed when the key is touched.
Make settings for a detection function such as double-feed and paper
existence, feed interval and on/off of the buzzer.
[8]
(Custom folding)
The [Paper Length] input screen of [Custom Fold] is displayed.
However, it is not displayed when the stopper fixed mode is selected.
[9]
(Save) key
Settings can be saved such as position adjustment of standard fold,
position of stacker roller, new non-standard paper setting and folding
setting of custom fold.
However, when adjustment values are not changed, the key is grayed out
and cannot be operated.
It is not displayed when stopper fixed mode is selected.
