![Ford 2014 Mondeo Скачать руководство пользователя страница 228](http://html.mh-extra.com/html/ford/2014-mondeo/2014-mondeo_owners-manual_2318061228.webp)
4. Connect the negative (-) terminal of
vehicle B to the ground connection of
vehicle A (cable D).
WARNINGS
Do not connect directly to the
negative (–) terminal of the flat
battery.
Make sure that the cables are clear
of any moving parts and fuel delivery
system parts.
To Start the Engine
1.
Run the engine of vehicle B at a
moderately high speed.
2. Start the engine of vehicle A.
3. Run both vehicles for a minimum of
three minutes before disconnecting the
cables.
WARNING
Do not switch the headlamps on
when disconnecting the cables. The
peak voltage could blow the bulbs.
Disconnect the cables in the reverse order.
POST-CRASH ALERT SYSTEM
The system flashes the direction indicator
lamps in the event of a serious impact that
deploys an airbag (front, side, side curtain
or Safety Canopy) or the safety belt
pretensioners.
The lamps turn off when:
•
You press the hazard control button.
•
You press the panic button (if
equipped) on the remote entry
transmitter.
•
Your vehicle runs out of power.
SPINOUT DETECTION
If your vehicle detects a spinout and it
comes to a stop, the hazard warning
flashers turn on. A spinout detected
message appears in the information
display. The message may not appear if
your vehicle runs out of power.
After your vehicle's hazard warning
flashers turn on, you can switch them off
by:
•
Pressing the hazard warning flasher
button.
•
Pressing the remote control unlock
button.
•
Pressing the remote control panic
button.
•
Switching the ignition on and off twice.
226
Mondeo (CNG) Vehicles Built From: 08-09-2014 Vehicles Built Up To: 19-04-2015, CG3633en enGBR, Edition date: 10/2014, First Printing
Roadside Emergencies