Saving a PreSet Position
1.
Switch the ignition on.
2. Adjust the seat, exterior mirrors and
steering column to your desired
position.
3. Press and hold the desired preset
button until you hear a single tone.
You can save up to three preset memory
positions. You can save a memory preset
at any time.
Recalling a PreSet Position
Press and release the preset button
associated with your desired driving
position. The seat, mirrors and steering
column move to the position stored for
that preset.
Note:
You can only recall a preset memory
position when the ignition is off, or when the
transmission is in park (P) or neutral (N)
(and your vehicle is not moving) if the
ignition is on.
You can recall a preset memory position
by pressing the unlock button on your
remote control or intelligent access key if
it is linked to a preset position.
Linking a PreSet Position to Your
Remote Control or Intelligent
Access Key
Your vehicle can save the preset memory
positions for up to three remote controls
or intelligent access keys.
1.
With the ignition on, move the memory
positions to the desired positions.
2. Press and hold the desired preset
button for about five seconds. A tone
sounds after about two seconds.
Continue holding until a second tone
is heard.
3. Within three seconds, press the lock
button on the remote control you are
linking.
To unlink a remote control, follow the
same procedure – except in step 3, press
the unlock button on the remote control.
Note:
Pressing any active memory feature
adjustment control - power seat, mirror, or
optional steering column switch or any
memory button – during a memory recall
cancels the operation.
A seat recall movement will also stop if
you drive your vehicle.
Note:
If more than one linked remote
control or intelligent access key is in range,
the memory function moves to the settings
of the first key stored.
Easy Entry and Exit Function
If you enable the easy entry and exit
feature, it automatically moves the driver
seat position rearward up to five
centimeters when the transmission is in
park (P) and you remove the key or turn
off the keyless start ignition.
The driver seat returns to the previous
position when you put the key in the
ignition or you activate the keyless start
ignition.
You can switch off the easy entry and exit
feature by using the driver information
display.
132
Mondeo (CNG) Vehicles Built From: 08-09-2014 Vehicles Built Up To: 19-04-2015, CG3633en enGBR, Edition date: 10/2014, First Printing
Seats