![Ford 2014 Mondeo Скачать руководство пользователя страница 205](http://html.mh-extra.com/html/ford/2014-mondeo/2014-mondeo_owners-manual_2318061205.webp)
Time Gap
Distance Gap
Graphics
Sensitivity
Speed
>0.9sec
>25m
Grey
Normal
62mph
(100km/h)
between
0.6sec and
0.9sec
between 17m and
25m
Yellow
Normal
62mph
(100km/h)
<0.6sec
<17m
Red
Normal
62mph
(100km/h)
Adjusting Pre-Collision Assist Settings
You can adjust the Alert and Distance Alert
sensitivity to one of three possible settings
by using the information display control.
See (page 86).
You can switch the distance indication
function off using the information display
controls. See (page 86).
If required, you can switch active braking
off using the information display controls.
See (page 86).
Note:
Active braking automatically turns
on every time you switch the ignition on.
Blocked Sensors
If a message regarding a blocked sensor
or front camera appears in the information
display, the radar signals or camera images
are obstructed. The radar sensor is located
behind a fascia cover near the driver side
of the lower grille. With an obstructed
radar, the Pre-Collision Assist system does
not function and cannot detect a vehicle
ahead. With the front camera obstructed,
the Pre-Collision Assist system function
reduces. The following table lists possible
causes and actions for when this message
displays.
203
Mondeo (CNG) Vehicles Built From: 08-09-2014 Vehicles Built Up To: 19-04-2015, CG3633en enGBR, Edition date: 10/2014, First Printing
Driving Aids