Use the steering wheel controls to operate
the system.
Switching the System On
Press and release the Adaptive Cruise
Control
CAN/OFF
button.
The cruise control indicator,
SET mph
(kph)
, the current gap setting indicator
and
Standby
displays in the instrument
cluster.
Setting a Speed
1.
Drive to desired speed.
2. Press and release
SET-
.
3. The information display shows a green
indicator light, current gap setting and
desired set speed.
4. Take your foot off the accelerator
pedal.
5. When the system detects a vehicle in
front of you, it will be displayed above
the horizontal bars.
Note:
When adaptive cruise control is
active, the set speed displayed in the
information display may vary slightly from
the speedometer.
Changing the Set Speed
•
Press the accelerator or brake pedal
until you reach the desired speed. Press
and release
SET-
.
•
Press and hold
RES+
or
SET-
until the
desired set speed shows on the
information display. The vehicle speed
will gradually change to the selected
speed.
•
Press and release
RES+
or
SET-
. The
set speed changes in 1 mph (1 km/h)
increments.
The system may apply the brakes to slow
the vehicle to the new set speed. The set
speed displays continuously in the
information display while the system is
active.
Canceling the Set Speed
Press the brake pedal or the clutch pedal
for an extended period, or press and
release the Adaptive Cruise Control
CAN/OFF
button. The last set speed
displays with a strikethrough.
183
Mondeo (CNG) Vehicles Built From: 08-09-2014 Vehicles Built Up To: 19-04-2015, CG3633en enGBR, Edition date: 10/2014, First Printing
Cruise Control