PRINCIPLE OF OPERATION
The traction control system helps avoid
drive wheel spin and loss of traction.
If your vehicle begins to slide, the system
applies the brakes to individual wheels
and, when needed, reduces engine power
at the same time. If the wheels spin when
accelerating on slippery or loose surfaces,
the system reduces engine power in order
to increase traction.
USING TRACTION CONTROL
The system automatically turns on each
time you switch the ignition on.
Note:
In some situations for example if your
vehicle is stuck in snow or mud, turning the
system off may be beneficial as this allows
the wheels to spin with full engine power.
Switching the System Off and On
Using the Information Display
Controls
Your vehicle comes with this feature
already enabled. If required, you can switch
this feature off using the information
display controls. See
General
Information
(page 86).
Stability control will remain on even when
you have switched the traction control off.
Switching the System Off and On
Using the Button
(If Equipped)
The button is located in the instrument
panel.
Press the button. You will see a message
in conjunction with an illuminated icon in
the display. Press the button again to
return the system to normal mode.
Stability control will remain on even when
you have switched the traction control off.
165
Mondeo (CNG) Vehicles Built From: 08-09-2014 Vehicles Built Up To: 19-04-2015, CG3633en enGBR, Edition date: 10/2014, First Printing
Traction Control