9. From the front of the vehicle, gently
pull the front bumper cover forward 4
inches (10 centimeters) by grasping it
next to the headlamp to be serviced
and in the lower front of the wheel
opening.
10.
Gently pull the headlamp assembly
outward to disengage it from the
lower fixing point.
11.
Carefully lift the headlamp and
remove it from the vehicle.
12.
Disconnect the electrical connector
from the headlamp assembly by
pushing the release tab on the
connector.
CHANGING A BULB
WARNINGS
Switch all of the lamps and the
ignition off. Failure to follow this
warning could result in serious
personal injury.
Bulbs become hot when in use. Let
them cool down before you remove
them.
Use the correct specification bulb. See
Bulb Specification Chart
(page 255).
Install in the reverse order unless otherwise
stated.
Headlamp
You must remove the headlamp assembly
prior to replacing any bulb. See
Bulb
Specification Chart
(page 255).
Front side lamp.
A
High beam.
B
Low beam.
C
Front direction indicator.
D
Front Side Lamp
1.
Remove the headlamp.
2. Remove the cover.
3. Remove the bulb holder by pulling it
straight out.
4. Remove the bulb by pulling it straight
out.
Front Direction Indicator
1.
Remove the headlamp.
2. Turn the bulb holder counterclockwise
and remove it.
Note:
You cannot separate the bulb from
the bulb holder.
Headlamp Low Beam
1.
Remove the headlamp.
2. Remove the cover.
252
Mondeo (CNG) Vehicles Built From: 08-09-2014 Vehicles Built Up To: 19-04-2015, CG3633en enGBR, Edition date: 10/2014, First Printing
Maintenance