Attaching a Child Seat with Top
Tethers
WARNINGS
Do not attach a tether strap to
anything other than the correct
tether anchor point.
Make sure that the top tether strap
is not slack or twisted and is properly
located on the anchor point.
Note:
Where applicable, remove the
luggage cover to ease installation.
1.
Route the tether strap to the anchor
point.
2. Push the child seat back firmly to
engage the ISOFIX lower anchor points.
3. Tighten the tether strap in line with the
child seat manufacturer's instructions.
CHILD SEAT POSITIONING
WARNINGS
See an authorized dealer for the
latest details relating to our
recommended child seats.
Extreme Hazard! Never use a
rearward facing child restraint on a
seat protected by an active airbag in
front of it. Death or serious injury to the
child can occur.
When using a child seat with a
support leg, the support leg must
rest securely on the floor.
When using a child seat with a safety
belt, make sure that the safety belt
is not slack or twisted.
The child seat must rest tightly
against the vehicle seat. It must not
touch the head restraint. If necessary
remove the head restraint. See
Head
Restraints
(page 126).
You must reinstall the head restraint
following the removal of the child
seat. See
Head Restraints
(page
126).
20
Mondeo (CNG) Vehicles Built From: 08-09-2014 Vehicles Built Up To: 19-04-2015, CG3633en enGBR, Edition date: 10/2014, First Printing
Child Safety