HEADLAMP EXIT DELAY
You can set the delay time to keep the headlamps on for up to three
minutes after the ignition is turned off.
Follow the steps below to change the delay time (Steps 1 through 6 must
be done within 10 seconds):
1. Turn the ignition off.
2. Turn the lighting control to the autolamp position.
3. Turn the lighting control to the off position.
4. Turn the ignition on.
5. Turn the ignition off.
6. Turn the lighting control to the autolamp position. The headlamps and
parking lamps will turn on.
7. Turn the lighting control to the off position when the desired delay
time has been reached. The headlamps and parking lamps will turn off.
You can set the headlamp exit delay to one of the following settings:
•
Off
•
10 seconds
•
20 seconds
•
30 seconds
•
60 seconds
•
90 seconds
•
120 seconds
•
180 seconds
Note:
You can also adjust the time delay using the display controls in the
instrument cluster. See the
Information Displays
chapter.
100
Lighting
2013 Flex
(471)
Owners Guide gf, 1st Printing
USA
(fus)