Changing the Set Speed
•
Press SET up or down and hold to increase or decrease the set speed.
Release the control when you reach the desired speed.
•
Press SET up or down and release. The set speed will change in
approximately 1 mph (2 km/h) increments.
•
Press the accelerator pedal or brake pedal until you reach the desired
speed. Press SET up and release.
Canceling a Set Speed
Press CNCL or tap the brake pedal. The set speed will not be erased.
Resuming a Set Speed
Press and release RES.
Switching Off Cruise Control
Note:
The set speed is erased when you switch off cruise control.
Press the OFF control down and release or turn off the ignition.
USING ADAPTIVE CRUISE CONTROL (IF EQUIPPED)
WARNING:
Always pay close attention to changing road conditions,
especially when using adaptive cruise control. Adaptive cruise
control cannot replace attentive driving. Failing to follow any of the
warnings below or failing to pay attention to the road may result in a
collision, serious injury or death.
WARNING:
Adaptive cruise control is not a collision warning or
avoidance system. Additionally, adaptive cruise control will not
detect:
•
Stationary or slow moving vehicles below 6 mph (10 km/h).
•
Pedestrians or objects in the roadway.
•
Oncoming vehicles in the same lane.
WARNING:
Do not use the adaptive cruise control when entering
or leaving a highway, in heavy traffic or on roads that are winding,
slippery or unpaved.
240
Cruise Control
2013 Flex
(471)
Owners Guide gf, 1st Printing
USA
(fus)