HOMELINK
姞
WIRELESS CONTROL SYSTEM (IF EQUIPPED)
WARNING:
Make sure that the garage door and security device
are free from obstruction when you are programming. Do not
program the system with the vehicle in the garage.
WARNING:
Do not use the system with any garage door opener
that does not have the safety stop and reverse feature as required
by U.S. Federal Safety Standards (this includes any garage door opener
manufactured before April 1, 1982).
Note:
Make sure you keep the original remote control transmitter for use
in other vehicles as well as for future system programming.
Note:
We recommend that upon the sale or lease termination of your
vehicle, you erase the programmed function buttons for security reasons.
See
Erasing the function button codes
later in this section.
Note:
You can program a maximum of three devices. To change or
replace any of the three devices after it has been initially programmed,
you must first erase the current settings. See
Erasing the function
button codes
later in this section.
The universal garage door opener
replaces the common hand-held
garage door opener with a
three-button transmitter that is
integrated into the driver’s sun visor.
The system includes two primary features, a garage door opener and a
platform for remote activation of devices with the home. As well as being
programmed for garage doors, the system transmitter can be
programmed to operate entry gate operators, security systems, entry
door locks, and home or office lighting.
Additional system information can be found on-line at www.homelink.com
or by calling the toll-free help line on 1-800-355-3515.
Programming
Note:
Put a new battery in the hand-held transmitter. This will ensure
quicker training and accurate transmission of the radio-frequency signal.
184
Universal Garage Door Opener
2013 Flex
(471)
Owners Guide gf, 1st Printing
USA
(fus)