ENGLIS
TECHNICAL DATA
Product code
STG2870
Model number
59595091
Engine
340-2A
Displacement
338CC
Electric start
120V
Tank capacity
5.3L
Speed
6 forward and 2 reverse
Chute rotation angle
190º
Working width
28” (
mm)
Working height
22” (559mm)
Pneumatic tires
13” x 5.00” – 6
Self-propelled
Yes
Auger clutch
Yes
H
Halogen light
eat handle
Y
30 W
es
ASSEMBLY
WARNiNG!
Always ensure that the tool is switched off and the plug
is removed from the power source before making any adjustments or
performing maintenance procedures.
Read and follow the assembly and adjustment instructions for your
snow thrower. All fasteners are in the parts bag. Do not discard any
parts or material until the unit is assembled.
WARNiNG:
Before doing any assembly or maintenance to the snow
thrower, remove the wire from the spark plug.
NOTE:
Torque is measured in foot pounds (metric N.m.). This
measurement describes how tight a nut or bolt must be. The torque is
measured with a torque wrench.
Tools Required
1. Knife
2. Pliers
3. 3/8”, 7/16”, 1/2” and 9/16” open end wrenches
4. Tire gauge
Remove the snow thrower from the carton (Fig. 4)
1. The snow thrower is shown in the shipping position.
2. Remove packing material from wheels, handle, and auger housing.
3. Locate and remove the parts bag.
4. Cut open the end of the carton next to the handle.
9
711
