FOR-A HVS-XT100, Руководство по эксплуатации, Страница: 175 / 236

175
20-2-4. VDCP Operation
In addition to the commands listed in section 20-2-3. "Playback and Recording," the switcher
can obtain a CLIP List stored in the connected VDCP device and play video specifying IN-
and OUT-points. Apart from Clips in the VDCP device, the switcher can store two Playlists, in
which the switcher's own information such as IN and OUT points are contained.

Each Playlist contains the following information.

CLIP ID (ID of the selected Clip stored in the connected device.)

IN point, OUT point and Duration values

The following operation procedures are available:
Creating Playlists
Specifying an IN-point and OUT-point for trimming
Jumping to an IN-point
Jumping to a location specified by time code
Changing CLIP ID (CLIP ID in the connected device also changes
according ly.)
Deleting Clips (Also deleted from connected device.)
Copying and clearing Playlists

The switcher can create new Clips

See page 178 "Creating New Clips."
Note that some VDCP devices may not support all commands available on the switcher.
In such case, unsupported commands cannot be executed from the switcher.

Creating Playlists
Selecting a Playlist
(1) Display the [SETUP - EXT I/F - VTR/VDCP] menu.
(2) Press the page down button to go to PAGE 5.
(3) Select 1 (Playlist 1) or 2 (Playlist 2) under
SELECT .
EXT I/F :SELECT : :FUNC : 5/7
VTR/VDCP:=
1 :>ID SET:>TC SET: >COPY :
Selecting a CLIP ID for the Playlist
(1) Press F2 in PAGE 5 of the [SETUP - EXT I/F - VTR/VDCP] menu to display the [CLIP]
menu.
EXT I/F :SELECT : :FUNC : 5/7
VTR/VDCP:=1 :>
ID SET :>TC SET: >COPY :
(2) The [CLIP] menu will display the Clip List stored in the connected device. Turn F1 to
select the CLIP ID of the desired Clip from the list and then press F1.
VTR/VDCP: CLIP0001 : : 1/1
CLIP :CLIP0002 :>RENAME :>CANCEL :
:CLIP0003 :
:CLIP0004 :
:CLIP0005 :
: | :
Select a CLIP ID from the CLIP List.
Up to 30 entries (up to 8 characters
for each) can be displayed.