FOR-A HVS-XT100, Руководство по эксплуатации

Страница: 176 / 236

176
(3) Once a CLIP ID is selected, the display automatically returns to the previous menu. Check
that the selected CLIP ID is displayed in the upper row. To cancel the operation, press F4.
EXT I/F :SELECT : CLIP0001 :FUNC : 5/7
VTR/VDCP:=1 :>ID SET:>TC SET: >COPY :
Setting IN and OUT points
IN-point and OUT-point or Duration settings for the Clip can be set and stored in Playlists.
(1) Go to PAGE 5 of the [VTR/VDCP] menu. Press F3 to display the [TC SET] menu.
EXT I/F :SELECT : :FUNC : 5/7
VTR/VDCP:=1 :>ID SET:>
TC SET : >COPY :
(2) Turn F1 to select IN.
VTR/VDCP:00:00:01:00 (STOP/00:05:00:00) : 1/2
TC SET :>
IN :>SET :>CUE UP : >OK: L=1
(3) Enter a time code value for an IN point to the left in the upper row of the menu display.
There are 3 methods of input. (See the table below.) The current status and time code are
displayed to the right in the menu.
Input method Description
Copy and paste the
current time code.
(MARK IN/MARK OUT) F1 Press Press F1. The current time code is copied
into the time code field.
Adjust time code on a
per-frame basis F2 Turn Turn F2 to increase or decrease the time
code on a per-frame basis.
Enter time code using the
keypad F2 Press Press F2. When the lights in the keypad turn
on, enter the value. Press ENTER to apply
the setting.
(4) Turn F1 to select OUT or DUR(duration).
VTR/VDCP:00:00:20:00 (STOP/00:05:00:00) : 1/2
TC SET :>
OUT :>SET :>CUE UP: >OK : L=1
(5) Set the OUT-point or Duration in the same way as those for IN-points.
(6) After settings are complete, press F4 to return to the previous menu.
Pressing F3 (CUE UP) can jump to the specified time code position. This is
convenient for checking IN point images.
Checking the Playlist Data
Press the page down button to go to PAGE 2 of the [TC SET] menu.
This menu displays the Playlist data: IN point, OUT point, current time code, duration and
playlist number.
VTR/VDCP:IN /00:00:01:00 TC /00:00:05:00: 2/2
TC SET :OUT/00:00:20:00 DUR/00:00:19:00: L=1