FOR-A HVS-XT100 Скачать руководство пользователя страница 117

Страница: 117 / 236

117



Still Directory Structure in the Main Unit

(Root) -----

(still1)---------

still.jpg
still.tga
still.bmp

Still images for STILL1 are stored in JPEG, TGA and
BMP format. To send image files to STILL1, specify
this directory.

(still2)---------

still.jpg
still.tga
still.bmp

Still images for STILL2 are stored in JPEG, TGA and
BMP format. To send image files to STILL2, specify
this directory.

(clip1)

Used for uploading movie files to STILL1.

(clip2)

Used for uploading movie files to STILL2.

(STILL_IN01)

Used for uploading still image files (INPUT STILL) for IN01

｜

(STILL_IN08)

Used for uploading still image files (INPUT STILL) for IN08

(STILL_MEM1) Used for uploading still image files to MEM1 (Still backup memory).

｜

(STILL_MEM4) Used for uploading still image files to MEM4 (Still backup memory).

｜

(USB)

Used for uploading (editing) data to the connected USB flash drive.

CLIP1
CLIP2

Used for uploading backup movie clips (sequential
files) to STILL1 and 2. Each folder should contain
only one clip.

STILL1
STILL2

Used for uploading backup image files to STILL1 and
2. Each folder should contain only one still image file.

STILL_IN01

｜

STILL_IN08

Used for uploading backup image files for INPUT
STILL to IN01 to IN08. Each folder should contain
only one still image file.

* When uploading image or clip data to a sub folder in the connected USB flash drive, previous data in the

folder must be removed.

* If a subfolder in the USB flash drive is accidentally erased, set

BACKUP

to OFF then ON. A new

subfolder will be created.



See section 12-3. "Backing-up Still and Clip Data (USB Flash Drive)."



For still images, see section 12. "Still Store."



For clip operations, see section 12-2. "Managing Clips."



For INPUT STILL, see section 5-4. "INPUT STILL (Freezing Input Video)."



For HVS-39MB, see section 12-3. "Backing-up Still and Clip Data (USB Flash Drive)."

Содержание HVS-XT100













































































































































































































































Результаты поиска

Содержание HVS-XT100

Отзывы:

FOR-A HVS-XT100, Руководство по эксплуатации, Страница: 117 / 236

Результаты поиска

Содержание HVS-XT100

Отзывы: